Getting your lawnmower ready for the season

Getting your lawn mower ready for the mowing season involves several important steps to ensure it runs smoothly and efficiently. Here’s a comprehensive guide to help you prepare your lawn mower:

1. Safety First

  • Disconnect the spark plug: Always disconnect the spark plug before working on your mower to prevent accidental starting.
  • Wear gloves and eye protection: This protects your hands from sharp blades and your eyes from debris.

2. Clean the Mower

  • Remove debris: Clear away any grass, leaves, and dirt from the mower deck and blades.
  • Wash the exterior: Use a garden hose and mild detergent to clean the mower’s exterior. Avoid using a pressure washer as it can damage components.

3. Inspect and Replace Parts

  • Check the blade: Inspect the mower blade for any damage or dullness. Sharpen or replace it if necessary.
  • Examine the air filter: A dirty air filter can hinder performance. Replace it if it’s dirty or clogged.
  • Inspect the spark plug: Replace the spark plug if it’s worn or dirty.
  • Check belts and cables: Ensure that all belts and cables are in good condition and replace any that show signs of wear.

4. Oil Change

  • Drain old oil: Remove the oil cap and drain the old oil into a container. Check your mower’s manual for proper disposal methods.
  • Refill with fresh oil: Use the type of oil recommended by the manufacturer. Typically, SAE 30 motor oil is used for warm weather.

5. Fuel System

  • Drain old fuel: If you didn’t empty the fuel tank before storing the mower, drain any old fuel. Stale fuel can cause starting problems.
  • Add fresh fuel: Refill with fresh gasoline. Consider using a fuel stabilizer to keep the fuel fresh longer.
  • Check the fuel filter: Replace it if it’s clogged or dirty.

6. Battery Maintenance (for electric start mowers)

  • Charge the battery: Ensure the battery is fully charged before the first use.
  • Inspect the connections: Clean and tighten any battery connections.

7. Lubricate Moving Parts

  • Lubricate the wheels and other moving parts: Use a suitable lubricant for moving parts to ensure smooth operation.

8. Test the Mower

  • Reconnect the spark plug: After all maintenance is complete, reconnect the spark plug.
  • Start the mower: Check for any unusual noises or vibrations. Ensure it runs smoothly and cuts grass effectively.

9. Adjust the Cutting Height

  • Set the desired cutting height: Adjust the mower deck to the appropriate height for your lawn.

10. Final Inspection

  • Check for loose parts: Ensure all nuts, bolts, and screws are tight.
  • Clean up: Dispose of old oil, fuel, and any replaced parts properly.

By following these steps, your lawn mower should be in optimal condition for the mowing season. Regular maintenance not only extends the life of your mower but also ensures a healthy and well-manicured lawn.